- Hybrid duplicator/eraser for SATA and USB devices.
The U-Reach HQ200H is a portable hybrid SATA-USB duplicator and eraser. The HQ200H is equipped with both SATA and USB "Source" and "Master" ports. This allows duplication from SATA to SATA, SATA to USB, USB to SATA and USB to USB. The U-Reach HQ200H SATA port is suitable for 1.8"/2.5"/3.5" SATA hard drives and SSD’s. The HQ200H USB ports are suitable for USB Sticks and external USB HDD’s. Due to the compact dimensions, the HQ200H duplicator can be used at any desired location.
The HQ200H duplicator offers a maximum copy speed of 18 GB per minute (300 MB/s). The HQ200H duplicator has four different copy functions available; "Quick Copy", "All Partitions Copy", "Percentage Copy" and "Whole HDD Copy". The Quick Copy function supports the following formats; FAT16/32, exFAT, NTFS, Linux (ext2/ext3/ext4) and Mac (HFS, HFS+, HFSX).
In addition to duplicating, the HQ200H duplicator can also be used to erase hard drives and SSD’s. Five Erase functions are available for this; "Quick Erase", "Full Erase", "Secure Erase", "DoD Erase" and "7-Pass DoD Erase". The DoD Erase function complies with the 5220.22-M US Department of Defense standard.
Optional adapters are available for the HQ200H SATA duplicator that allow various drive interfaces to be connected to the SATA or USB ports of the HQ200H. Adapters are available for IDE, mSATA, eSATA, iVDR, M.2 (NGFF) and Cfast, among others.
- Portable disk eraser with compact dimensions for use on every location.
- Copy from and to SATA HDD/SSD and USB sticks/HDD.
- Supports Advanced Format HDD (15 TB+) and GPT, MRB table format.
- Whole HDD Copy supports all formats through bitwise duplication.
- Easy operation with buttons and LCD display.
U-Reach HQ200H Hybrid Duplicators are able to duplicate at a maximum speed of 18 GB/min to each SATA/USB port. The speed always remains constant, even if the number of media to be duplicated increases.
Copyright ©2001-2021 U-Reach Nederland, all rights reserved.