- Standalone HDD/SSD duplicator, no PC connection or software required.
The U-Reach MTS series duplicators are professional systems for duplicating and erasing SAS and SATA hard disk drives/SSD's. The MTS duplicators offer a very high copy speed of 18 GB per minute (300 MB/s) on all channels. The speed does not decrease when multiple hard disks are connected. This makes the U-Reach MTS SAS duplicators very suitable for duplicating or erasing SSD's and fast hard disk drives. The U-Reach MTS 1-7 hard disk duplicator can make seven copies of a SAS/SATA SSD or hard disk drive simultaneously.
In addition to duplicating, the MTS duplicator can also be used for erasing SSD's and hard disk drives. Seven Erase functions are available for this; "Quick Erase", "Full Erase", "DoD Erase", DoD 7-pass Erase", "Secure Erase", "Enhance Secure erase" and "NSA Erase". The MTS SAS duplicators therefore comply with the DoD 5220.22-M, NSA and NIST 800-88 Secure Erase standards. The MTS erase functions support asynchronous erasure; each SAS/SATA port can delete an individual disk.
Thanks to the "Open Platform" design of the MTS duplicator series with external cabling, connectors can be changed quickly and easily. This "multi-interface" support with various optional adapters makes duplicating a wide variety of SSD's, hard disks and other data formats simple and efficient. Adapters are available for IDE, eSATA, mSATA, microSATA, M.2 (NGFF) and CFast.
The MTS HDD duplicators operate stand-alone, no PC or software is needed. Operating the unit is simple; all functions are controlled via the function keys and the LCD display. Using the "PC Monitoring" function, the current status and functioning of the MTS hard disk duplicator can be monitored via a PC. Extensive production information can be stored and consulted with the iSecuLog Log Report Management function. The MTS HDD duplicator offers four different copy functions; "Quick Smart Copy", "All Partitions Copy", "Percentage Copy" and "Whole HDD Copy". The Quick Copy function supports the following formats; FAT16/32, exFAT, NTFS, Linux (ext2/ext3/ext4) and Mac (HFS, HFS+, HFSX).
- Standalone SAS/SATA HDD/SSD duplicator, geen PC of software nodig.
- Gelijktijdig meerdere SAS of SATA disks dupliceren of wissen.
- Supports Advanced Format HDD (15 TB+) and GPT, MRB table format.
- Whole HDD Copy supports all formats through bitwise duplication.
- Easy operation with buttons and LCD display.
- Open Platform design for easy media exchange.
U-Reach MTS series erasers are able to simultaneously sanitize at a maximum speed of 18 GB/min to each SATA port. The speed always remains constant, even if the number of media to be sanitized increases.
Copyright ©2001-2021 U-Reach Nederland, all rights reserved.