- Standalone PCIe NVMe/SATA M.2 duplicator, no PC or software required.
- High speed copy up to 9 GB/min (150 MB/s), per port.
- Cross-Signal duplication support (M2 SATA - M2 NVMe).
- Full set of sanitization modes; Quick, Full, Secure and DoD Erase.
- Open platform design supports M.2 M key and B+M key.
- Different copy modes; Quick Copy and Whole Device Copy.
- Supports hot swapping of modules.
Available models:
The U-Reach PX400 PCIe M.2 duplicator is a compact professional system for duplicating and sanitizing PCI-Express M.2 NVMe/SATA modules. The U-Reach PX400 1-3 duplicator can create three copies of a M.2 module simultaneously. The U-Reach PX400 M.2 duplicator operates standalone, no PC or software is required. Operation is simple; all functions are selected using the keys and the LCD display.
The PX400 M.2 duplicator supports "Cross-Signal Duplication". This allows duplication from SATA M.2 SSD to NVMe M.2 SSD (and vice versa). The PX400 duplicator offers a high copy speed of 9 GB per minute (150 MB/s) on all channels. The speed does not decrease when multiple modules are connected. This makes the U-Reach PX400 duplicator very suitable for duplicating or erasing smaller numbers of NVMe/SATA M.2 drives.
The PX400 PCIe M.2 duplicator offers four different copy functions; "Quick Copy", "All Partitions Copy", "Percentage Copy" and "Whole HDD Copy". The Quick Copy function supports the following formats; FAT16/32, exFAT, NTFS, Linux (ext2/ext3/ext4) and Mac (HFS, HFS +, HFSX). In addition to duplication, the PX400 duplicator can also be used to erase M.2 modules. Four Erase functions are available; "Quick Erase", "Full Erase", "Secure Erase" and "DoD Erase". The DoD Erase function complies with the 5220.22-M US Department of Defense standard.
The Open Platform design of the U-Reach PX400 M.2 duplicators offers "Cable Free" connectors. NVMe/SATA M.2 modules can be connected directly to the M.2 connectors of the duplicator. Optional adapters are available for using MAC PCIe SSDs.
- Standalone PCIe NVMe M.2 duplicator, no PC connection or software required.
- Erase or duplicate multiple PCIe M.2 modules at the same time.
- Maximum copy speed up to 9 GB per minute, per port.
- Maximum copy speed up to 9 GB per minute, per port.
- Quick Copy and Whole Media Copy.
- Quick Copy and Whole Media Copy.
- Supports Advanced Format HDD (15 TB+) and GPT, MRB table format.
- Supports Cross-Signal duplication (M2 SATA - M2 NVMe).
- Supports M.2 M key and B+M key.
- Full set of sanitization options; Quick, Full, Secure and DoD Erase.
- Full set of sanitization options; Quick, Full, Secure and DoD Erase.
- Cable Free M.2 sockets for NVMe/SATA M key and B+M key.
- Cable Free M.2 sockets for NVMe/SATA M key and B+M key.
- Easy operation with buttons and LCD display.
- Easy operation with buttons and LCD display.
- Open platform design with modular M.2 sockets.
- Open Platform design with modular M.2 sockets.
- Supports hot swapping of modules.
Maximum copy speed
Quick Copy
Sanitization
Cable Free M.2 sockets
Easy operation
Open platform design
The U-Reach PX400 PCIe M.2 duplicators are able to simultaneously duplicate at a maximum speed of 9 GB/min to each port. The speed always remains constant, even if the number of media to be duplicated increases.
The "Quick Copy" function only duplicates the existing data area on an NTFS, Linux (ext2/ext3/ext4) FAT16/32 or exFAT partition. The duplication process can be accelerated considerably in most cases. Other not supported data formats can also be duplicated with the "Whole Media" copy function. This will duplicate the entire content in a bitwise operation.
The U-Reach erasers support different sanitization methods for hard disk drives and SSD's: Quick Erase: Only overwrite FAT. Full Erase: Overwrite the entire data carrier. DoD Erase: Multiple cycles, complies with the US Department of Defence 5220.22-M standard. Secure Erase: A NIST 800-88 supported method to securely sanitize modern drives (HDD and SSD).
With "Cable Free Connection" you can simply plug a PCIe M.2 module directly into each M.2 connector on the system. No need for extra cables or adapters.
The Ureach PX400 NVMe/SATA M.2 duplicator is very easy to operate with four buttons and a LCD display.
The U-Reach PX400 NVMe/SATA M.2 duplicator offers "Open Platform" design with which M.2 modules can easily be connected and swapped. If necessary, the M.2 sockets themself can also be easily exchanged.
Maximum 150 MB/s (9 GB/min) per M.2 port (depending on the media used)
Capacity
Supports Advanced Format HDD (15 TB+) and GPT, MRB table format
Connection
Standalone operation without computer or software
Language support
English, Japanese
Operation
- Display: monochrome LCD
- Status LED: (red / green / yellow) on each SATA port
- Operation keys: 4 push buttons (up, down, OK, ESC)
Supported media
- Native: M.2 (NGFF) M key and B+M key
- With optional adapters: MAC PCIe SSD
Suported signals
NVMe, AHCI/SATA (Auto Detect)
Standard functions
- Copy: Quick Copy, All Partitions Copy, Percentage Copy and Whole HDD Copy
- Compare: Bit by Bit data compare
- Erase: Quick Erase, Full Erase , DoD Erase (DoD 5220.22-M), DoD Erase+Compare
Supported formats
- Quick Copy: FAT16/32, exFAT, NTFS, Linux (Ext2/Ext3/Ext4), MAC (HFS, HFSX, HFS+)
- Whole Media Copy: all formats
Supported file systems
All (Windows, Macintosh, Linux, Unix etc.)
Power supply
External Power Adapter 12V, 9A
Temperature and humidity
- In use: 5°C ~ 45°C (RH: 20% ~ 80%)
- Not in use: -20°C ~ 85°C (RH: 5% ~ 95%)
All prices and specifications are subject to change and availability.
All offers and orders are subject to our general terms and conditions. Please take note of our disclaimer and
privacy policy. Type errors as well as price changes reserved.
×
Maximum copy speed
The U-Reach PX400 PCIe M.2 duplicators are able to simultaneously duplicate at a maximum speed of 9 GB/min to each port. The speed always remains constant, even if the number of media to be duplicated increases.
×
Quick Copy
The "Quick Copy" function only duplicates the existing data area on an NTFS, Linux (ext2/ext3/ext4) FAT16/32 or exFAT partition. The duplication process can be accelerated considerably in most cases. Other not supported data formats can also be duplicated with the "Whole Media" copy function. This will duplicate the entire content in a bitwise operation.
×
Sanitization
The U-Reach erasers support different sanitization methods for hard disk drives and SSD's: Quick Erase: Only overwrite FAT. Full Erase: Overwrite the entire data carrier. DoD Erase: Multiple cycles, complies with the US Department of Defence 5220.22-M standard. Secure Erase: A NIST 800-88 supported method to securely sanitize modern drives (HDD and SSD).
×
Cable Free M.2 sockets
With "Cable Free Connection" you can simply plug a PCIe NVMe/SATA M.2 module directly into each M.2 connector on the system. No need for extra cables or adapters.
×
Easy operation
The Ureach PX400 NVMe/SATA M.2 duplicator is very easy to operate with four buttons and a LCD display.
×
Open platform design
The U-Reach PX400 NVMe/SATA M.2 duplicator offers "Open Platform" design with which M.2 modules can easily be connected and swapped. If necessary, the M.2 sockets themself can also be easily exchanged.